Issue 14, 2015

Morphology of latex and nanocomposite adsorbents prepared by freeze-casting

Abstract

Freeze-casting liquid dispersions of solid particles is a useful alternative for synthesizing porous solids, thus creating lightweight and mechanically resistant materials for various applications. This work describes and discusses different morphologies obtained by freeze-casting poly(styrene-acrylic) latex aqueous dispersions, either pristine or foamed, and compares them with those prepared by the addition of nanoclay. The surface area and dye sorption capacity of freeze-cast latex–clay nanocomposite monoliths are much higher than those of the freeze-cast latex only and the pore morphology is also different in these solids. The freeze-cast polymer displays an interesting morphology including a fishbone shape unprecedented in non-crystalline solids cast from aqueous media. Quite differently, the latex–clay nanocomposite exhibits only lamellar pores with irregular features on their walls. These differences are assigned to the stiffening role of the clay lamellae in the rubbery polymer, reducing the extent of particle aggregation and coalescence and thus preserving voids. Dispersion foaming prior to freeze-casting produces additional features in the solids but without making a positive contribution to the surface area and dye sorption capacity. These results are understood considering pore templating by ice crystal growth and the templating effect of clay particles on fine ice morphology.

Graphical abstract: Morphology of latex and nanocomposite adsorbents prepared by freeze-casting

Supplementary files

Article information

Article type
Paper
Submitted
27 Oct 2014
Accepted
08 Jan 2015
First published
09 Jan 2015

J. Mater. Chem. A, 2015,3, 7263-7272

Author version available

Morphology of latex and nanocomposite adsorbents prepared by freeze-casting

L. L. da Silva and F. Galembeck, J. Mater. Chem. A, 2015, 3, 7263 DOI: 10.1039/C4TA05743K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements