Issue 47, 2014

α-Fe2O3 films for photoelectrochemical water oxidation – insights of key performance parameters

Abstract

We report the deposition of ultra-thin α-Fe2O3 (hematite) films on fluorine-doped tin oxide (FTO) substrates using radio frequency (RF) sputtering, and the investigation of their photoelectrochemical (PEC) performance towards water oxidation. By varying the deposition pressure and time, the film microstructure and morphology could be optimized. The best hematite films having a thickness of about 50 nm exhibited a photocurrent density of 0.59 mA cm−2 at U = 1.23 V vs. RHE and 1.92 mA cm−2 at U = 1.85 V using a tungsten halogen lamp of 40 mW cm−2 light intensity in the wavelength range from 300 to 600 nm. These values are comparable or even higher than those ever measured hematite films (undoped and having no co-catalyst deposited on top of the electrode). Further measurements were explored to investigate the limiting factors in our films for possibly approaching their predicted PEC properties. A detailed analysis reveals that a slow water oxidation reaction and a trapping of charges on the surface, especially at the potential below 1.4 V, are obviously the reasons for the limited PEC performance.

Graphical abstract: α-Fe2O3 films for photoelectrochemical water oxidation – insights of key performance parameters

Supplementary files

Article information

Article type
Paper
Submitted
10 Sep 2014
Accepted
24 Oct 2014
First published
24 Oct 2014

J. Mater. Chem. A, 2014,2, 20196-20202

α-Fe2O3 films for photoelectrochemical water oxidation – insights of key performance parameters

L. Jia, K. Harbauer, P. Bogdanoff, I. Herrmann-Geppert, A. Ramírez, R. van de Krol and S. Fiechter, J. Mater. Chem. A, 2014, 2, 20196 DOI: 10.1039/C4TA04720F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements