Jump to main content
Jump to site search

Issue 41, 2012
Previous Article Next Article

Interface-induced recirculation within a stationary microfluidic drop

Author affiliations

Abstract

We study the flow within a stationary drop in a Hele-Shaw cell. The experiments are performed in a microfluidic channel, whose surface is patterned with a single hole that serves to anchor the drop while the outer fluid continues to flow. The recirculation pattern is found to be localized near the liquid–liquid interface for all conditions, with most of the fluid motion taking place in the curved rim of the droplet. In contrast, the drop's central region remains nearly stationary. This flow pattern corresponds to a three-dimensional recirculation on the drop surface, with the fluid moving in the direction of the outer flow on the central plane and in the opposite direction closer to the boundaries. The different velocities scale linearly with the outer fluid velocity for all geometries studied. However, the velocity on the interface is found to be lower than the driving velocity even in the case of a gas bubble, pointing to the effect of surface stresses as the underlying retardation and recirculation mechanism. This motivates the development of a Marangoni model to account for the surfactant accumulation around the downstream stagnation point. The model displays good qualitative agreement with the experimental observations for many viscosity ratios and geometries but for a well-chosen surfactant accumulation.

Graphical abstract: Interface-induced recirculation within a stationary microfluidic drop

Back to tab navigation

Supplementary files

Article information


Submitted
04 May 2012
Accepted
31 Jul 2012
First published
24 Aug 2012

Soft Matter, 2012,8, 10750-10758
Article type
Paper

Interface-induced recirculation within a stationary microfluidic drop

S. Lee, F. Gallaire and C. N. Baroud, Soft Matter, 2012, 8, 10750
DOI: 10.1039/C2SM26044A

Social activity

Search articles by author

Spotlight

Advertisements