Jump to main content
Jump to site search

Issue 22, 2010
Previous Article Next Article

Random blisters on stickers: metrology through defects

Author affiliations

Abstract

Blisters are commonly observed when an adhesive sheet is carelessly deposited on a plate. Although such blisters are usually not desired for practical applications, we show through model experiments on angular blisters how material properties can be deduced from height profile measurements. In particular the typical curvature of the crests is found to be proportional to an elasto-capillary length that compares the bending stiffness of the sheet with the adhesion energy. In addition, the radius of the tip allows the estimation of the product of this length with the thickness of the sheet. The relevance of these results to realistic random configurations is finally confirmed.

Graphical abstract: Random blisters on stickers: metrology through defects

Back to tab navigation

Publication details

The article was received on 27 May 2010, accepted on 06 Aug 2010 and first published on 29 Sep 2010


Article type: Paper
DOI: 10.1039/C0SM00436G
Soft Matter, 2010,6, 5720-5728

  •   Request permissions

    Random blisters on stickers: metrology through defects

    Y. Aoyanagi, J. Hure, J. Bico and B. Roman, Soft Matter, 2010, 6, 5720
    DOI: 10.1039/C0SM00436G

Search articles by author

Spotlight

Advertisements