Issue 3, 2008

On the suitability of carbon nanotube forests as non-stick surfaces for nanomanipulation

Abstract

A carbon nanotube forest provides a unique non-stick surface for nanomanipulation, as the nanostructuring of the surface allows micro- and nanoscale objects to be easily removed after first being deposited via a liquid dispersion. A common problem for smooth surfaces is the strong initial stiction caused by adhesion forces after deposition onto the surface. In this work, carbon nanotube forests fabricated by plasma-enhanced chemical vapour deposition are compared to structures with a similar morphology, silicon nanograss, defined by anisotropic reactive ion-etching. While manipulation experiments with latex microbeads on structured as well as smooth surfaces (gold, silicon, silicon dioxide, Teflon, diamond-like carbon) showed a very low initial stiction for both carbon nanotube forests and silicon nanograss, a homogeneous distribution of particles was significantly easier to achieve on the carbon nanotube forests. Contact-angle measurements during gradual evaporation revealed that the silicon nanograss was superhydrophic with no contact-line pinning, while carbon nanotube forests in contrast showed strong contact-line pinning, as confirmed by environmental scanning electron microscopy of microdroplets. As a consequence, latex microbeads dispersed on the surface from an aqueous solution distributed evenly on carbon nanotube forests, but formed large agglomerates after evaporation on silicon nanograss. Lateral manipulation of latex microbeads with a microcantilever was found to be easier on carbon nanotube forests and silicon nanograss compared to smooth diamond-like carbon, due to a substantially lower initial stiction force on surfaces with nanoscale roughness. Nanomanipulation of bismuth nanowires, carbon nanotubes and organic nanofibres was demonstrated on carbon nanotube forests using a sharp tungsten tip. We find that the reason for the remarkable suitability of carbon nanotube forests as a non-stick surface for nanomanipulation is indeed the strong contact-line pinning in combination with the nanostructured surface, which allows homogeneous dispersion and easy manipulation of individual particles.

Graphical abstract: On the suitability of carbon nanotube forests as non-stick surfaces for nanomanipulation

Article information

Article type
Emerging Area
Submitted
02 Jul 2007
Accepted
23 Nov 2007
First published
16 Jan 2008

Soft Matter, 2008,4, 392-399

On the suitability of carbon nanotube forests as non-stick surfaces for nanomanipulation

K. Gjerde, R. T. R. Kumar, K. N. Andersen, J. Kjelstrup-Hansen, K. B. K. Teo, W. I. Milne, C. Persson, K. Mølhave, H. Rubahn and P. Bøggild, Soft Matter, 2008, 4, 392 DOI: 10.1039/B709870G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements