Issue 69, 2018, Issue in Progress

Synthesis and characterization of nano-crystalized HfC based on an aqueous solution-derived precursor

Abstract

Nano-crystalized HfC was successfully synthesized based on an aqueous solution-derived precursor using hafnium tetrachloride and sucrose as raw materials. The precursor can be converted to pure phase HfC after pyrolysis at ∼600 °C and subsequent carbothermal reduction reaction at ∼1600 °C, with a ceramic yield of around 46.3%. Reaction mechanisms of the synthesis process are revealed based on FT-IR, TG-DSC, TEM analysis and thermodynamic calculations, etc. The obtained HfC nanoparticles possess an equiaxial shape with an average particle size of ∼73 nm. Oxygen content of the as-synthesized HfC powders is as low as 0.64 wt%, which exists in the form of an amorphous Hf–O–C thin layer covering the surface of the HfC particles. This feasible and promising method for HfC particle synthesis is believed to be suitable for the fabrication of continuous fibers reinforced HfC ceramic matrix composites.

Graphical abstract: Synthesis and characterization of nano-crystalized HfC based on an aqueous solution-derived precursor

Article information

Article type
Paper
Submitted
30 Sep 2018
Accepted
19 Nov 2018
First published
26 Nov 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 39284-39290

Synthesis and characterization of nano-crystalized HfC based on an aqueous solution-derived precursor

Y. Jiang, D. Ni, Q. Ding, B. Chen, X. Chen, Y. Kan and S. Dong, RSC Adv., 2018, 8, 39284 DOI: 10.1039/C8RA08123A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements