Issue 80, 2017

Controlled growth of aligned GaN nanostructures: from nanowires and needles to micro-rods on a single substrate

Abstract

Simultaneous growth of different kinds of aligned GaN nanostructures (i.e., nanowires, needles, pyramids and micro-rods) on a single substrate was firstly realized at a low temperature of 790 °C by naturally changing the III/V ratio across the substrate via a coaxial pipeline configuration. The effects of substrate distance and growth pressure on nanostructure growth were investigated. The morphology variation from nanowires to micros-rods would be explained in terms of Ga species changing from the Ga element to GaN molecule in a hot-wall reactor. This work is helpful for on chip integration of different kinds of nanodevices on unusual substrates of low melting temperature.

Graphical abstract: Controlled growth of aligned GaN nanostructures: from nanowires and needles to micro-rods on a single substrate

Supplementary files

Article information

Article type
Paper
Submitted
04 Sep 2017
Accepted
23 Oct 2017
First published
01 Nov 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 50781-50785

Controlled growth of aligned GaN nanostructures: from nanowires and needles to micro-rods on a single substrate

D. Zhao, H. Huang, R. Lv, S. Chen, Q. Guang, Y. Zong, Z. Liu and X. Li, RSC Adv., 2017, 7, 50781 DOI: 10.1039/C7RA09813H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements