Issue 55, 2017

DBP and C70 based inverted tandem solar cells using a simple interconnecting layer

Abstract

Inverted tandem structure cells with a simple interconnecting layer based on tetraphenyldibenzoperiflanthene (DBP) and fullerene-70 (C70) were studied in this work. Two subcells using identical donor and acceptor materials were connected by a molybdenum trioxide and calcium (MoO3/Ca) interlayer in series. An outstanding fill factor (over 80%) under concentrated power intensity has been observed. Meanwhile, the open circuit voltage is approximately equal to the sum of the two subcells, revealing the excellent properties of MoO3/Ca as a recombination layer for tandem structured cells. On the other hand, the main loss mechanisms of charge carriers are analyzed; Schokley–Read–Hall and bimolecular recombination dominate the charge recombination in the tandem structured cells under low and high power intensities, respectively.

Graphical abstract: DBP and C70 based inverted tandem solar cells using a simple interconnecting layer

Supplementary files

Article information

Article type
Paper
Submitted
21 Apr 2017
Accepted
06 Jul 2017
First published
11 Jul 2017
This article is Open Access
Creative Commons BY license

RSC Adv., 2017,7, 34664-34668

DBP and C70 based inverted tandem solar cells using a simple interconnecting layer

Z. Wang, T. Sano, T. Zhuang, H. Sasabe and J. Kido, RSC Adv., 2017, 7, 34664 DOI: 10.1039/C7RA04501H

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements