Issue 44, 2016, Issue in Progress

High performance electromagnetic wave absorbers derived from PC/SAN blends containing multiwall carbon nanotubes and Fe3O4 decorated onto graphene oxide sheets

Abstract

A high performance electromagnetic wave absorber with high surface resistivity (i.e. minimum surface reflection) and an enhanced attenuation constant (i.e. maximum absorption) was designed using uneven distribution of lossy materials like multiwall carbon nanotubes (MWNTs) and magnetic ferrite (Fe3O4) nanoparticles (of 2–5 nm) nucleated on reduced graphene oxide sheets (rGO–Fe3O4) in biphasic polymeric blends of polycarbonate (PC) and poly(styrene-co-acrylonitrile) (SAN). The uneven distribution of MWNTs and rGO–Fe3O4 in the blends, which acted as micro-absorbers resulted in outstanding electromagnetic wave absorption (93%). Various parameters like transmission coefficient, attenuation constant and skin depth were assessed for a clear understanding of the attenuation mechanism in each of the blends containing different nano-inclusions like MWNTs and Fe3O4, only rGO–Fe3O4 and a combination of MWNTs and rGO–Fe3O4. It is understood that the absorption was significantly enhanced due to selective localization of nano-inclusions in the PC phase that provided heterogeneous dielectric media with multiple interfaces. The penetration of the high frequency electromagnetic waves into the shield was facilitated by high surface resistivity and high volume electrical conductivity (5 S cm−1). Further, in combination with lossy nano-inclusions the incoming EM radiation was attenuated through multiple scattering. This is realized in the blends containing both MWNTs and rGO–Fe3O4 which manifested in a total shielding effectiveness of −50.7 dB (at 18 GHz), indicating >99.9% attenuation of the incoming microwave radiation, in striking contrast to blends containing either only MWNTs or only rGO–Fe3O4. Taken together, this study clearly demonstrates that lightweight polymeric nanocomposites can be designed for high frequency electromagnetic wave absorption through unique synergism of MWNTs and ultra-small magnetic ferrite nanoparticles nucleated on rGO sheets.

Graphical abstract: High performance electromagnetic wave absorbers derived from PC/SAN blends containing multiwall carbon nanotubes and Fe3O4 decorated onto graphene oxide sheets

Article information

Article type
Paper
Submitted
30 Nov 2015
Accepted
08 Apr 2016
First published
11 Apr 2016

RSC Adv., 2016,6, 37633-37645

High performance electromagnetic wave absorbers derived from PC/SAN blends containing multiwall carbon nanotubes and Fe3O4 decorated onto graphene oxide sheets

S. P. Pawar, M. Gandi and S. Bose, RSC Adv., 2016, 6, 37633 DOI: 10.1039/C5RA25435C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements