Issue 2, 2016

Rapid detection of Enterobacter cloacae by immunomagnetic separation and a colloidal gold-based immunochromatographic assay

Abstract

To establish the rapid detection of Enterobacter cloacae in food, immunomagnetic beads were prepared by coupling an anti-E. cloacae polyclonal antibody with magnetic beads. An immunochromatographic test strip was composited with an anti-E. cloacae monoclonal antibody marked by colloidal gold as the detection antibody, anti-E. cloacae polyclonal antibody as the test line, and donkey anti-mouse IgG secondary antibody as the control line. Immunomagnetic separation was combined with a colloidal gold-based immunochromatographic assay for the rapid detection of E. cloacae. The results showed that 102 CFU mL−1 E. cloacae could be detected using the immunochromatographic test strip after immunomagnetic separation. The sensitivity was 10 times higher than direct detection with an immunochromatographic test strip. With the immunochromatographic test strip, water samples spiked with E. cloacae yielded a negative result, whereas E. cloacae yielded a positive result with immunomagnetic separation. The proposed method enhances the rapid detection of E. cloacae in food.

Graphical abstract: Rapid detection of Enterobacter cloacae by immunomagnetic separation and a colloidal gold-based immunochromatographic assay

Article information

Article type
Paper
Submitted
08 Nov 2015
Accepted
04 Dec 2015
First published
07 Dec 2015

RSC Adv., 2016,6, 1279-1287

Rapid detection of Enterobacter cloacae by immunomagnetic separation and a colloidal gold-based immunochromatographic assay

X. Zhang, J. Zhou, C. Zhang, D. Zhang and X. Su, RSC Adv., 2016, 6, 1279 DOI: 10.1039/C5RA23533B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements