Issue 81, 2015

Improved stability and enhanced efficiency of dye sensitized solar cells by using europium doped yttrium vanadate down-shifting nanophosphor

Abstract

Through detailed experiments, it has been deduced that ultraviolet (UV) light is a major factor in the degradation of dye-sensitized solar cell (DSSC) performance due to generation of surface defects in nanoporous TiO2 and dye structural modification with free radical formation. We describe a simple spray deposition method to coat europium doped yttrium vanadate (YVO4:Eu3+) down-shifting (DS) phosphor nanoparticles (NPs) on the front side of DSSCs in order to enhance photocurrent and mitigate UV induced degradation. The nanophosphor provides an enhancement in short-wavelength spectral response of solar cells, and long-term stability is also improved under illumination, due to down-shifting of high energy UV photons to the visible region. Our observations demonstrate that the DS nanophosphor layer can be used as an optical filter with visible light transmission and UV light absorption, through placement on the front surface of DSSCs to provide stability, as well as for improving the performance.

Graphical abstract: Improved stability and enhanced efficiency of dye sensitized solar cells by using europium doped yttrium vanadate down-shifting nanophosphor

Supplementary files

Article information

Article type
Paper
Submitted
28 May 2015
Accepted
29 Jul 2015
First published
29 Jul 2015

RSC Adv., 2015,5, 66057-66066

Improved stability and enhanced efficiency of dye sensitized solar cells by using europium doped yttrium vanadate down-shifting nanophosphor

N. Chander, A. F. Khan and V. K. Komarala, RSC Adv., 2015, 5, 66057 DOI: 10.1039/C5RA10067D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements