Jump to main content
Jump to site search
PLANNED MAINTENANCE Close the message box

Scheduled maintenance work on Wednesday 27th March 2019 from 11:00 AM to 1:00 PM (GMT).

During this time our website performance may be temporarily affected. We apologise for any inconvenience this might cause and thank you for your patience.

Issue 62, 2015
Previous Article Next Article

Macroporous monoliths for trace metal extraction from seawater

Author affiliations


The viability of seawater-based uranium recovery depends on the uranium adsorption rate and capacity, since the concentration of uranium in the oceans is relatively low (3.3 μg L−1). An important consideration for a fast adsorption is to maximize the adsorption properties of adsorbents such as surface areas and pore structures, which can greatly improve the kinetics of uranium extraction and the adsorption capacity simultaneously. Following this consideration, macroporous monolith adsorbents were prepared from the copolymerization of acrylonitrile (AN) and N,N′-methylene-bis(acrylamide) (MBAAm) based on a cryogel method using both hydrophobic and hydrophilic monomers. The monolithic sorbents were tested with simulated seawater containing a high uranyl concentration (∼6 ppm) and the uranium adsorption results showed that the adsorption capacities are strongly influenced by the ratio of monomer to the crosslinker, i.e., the density of the amidoxime groups. The preliminary seawater testing indicates the high salinity content of seawater does not hinder the adsorption of uranium.

Graphical abstract: Macroporous monoliths for trace metal extraction from seawater

Back to tab navigation

Publication details

The article was received on 03 Feb 2015, accepted on 28 May 2015 and first published on 29 May 2015

Article type: Paper
DOI: 10.1039/C5RA02131F
Citation: RSC Adv., 2015,5, 50005-50010

  •   Request permissions

    Macroporous monoliths for trace metal extraction from seawater

    Y. Yue, R. T. Mayes, G. Gill, L. Kuo, J. Wood, A. Binder, S. Brown and S. Dai, RSC Adv., 2015, 5, 50005
    DOI: 10.1039/C5RA02131F

Search articles by author