Issue 48, 2015

A predictive mass transport model for gas separation using glassy polymer membranes

Abstract

In this work, a predictive mass transfer model was developed based on the solution-diffusion mechanism for gas permeation through glassy polymer membranes. For this purpose, the non-equilibrium lattice fluid (NELF) theory in conjunction with the modified Fick's law and the free volume theory were employed for prediction of gas sorption and permeation and the computational fluid dynamics (CFD) method was used to solve the governing transport equations. This CFD modeling was solved based on the two different cases for the gas diffusion coefficients inside the membrane: (Case 1) concentration dependent diffusion coefficients from the literature and (Case 2) developed diffusion coefficient based on the free volume theory. The proposed models were validated by the experimental data collected in this work as well as the experimental data reported in the literature. The results revealed that the NELF model enables us to predict the sorption behavior of N2, O2, CO2 and CH4 into the polysulfone membrane and the predicted sorption values were in very good agreement with experimental results. Furthermore, the developed mass transport model is able to determine the influence of operating parameters such as temperature and pressure on the separation performance of the membrane and the experimental flux and selectivity were satisfactorily predicted by the proposed model.

Graphical abstract: A predictive mass transport model for gas separation using glassy polymer membranes

Article information

Article type
Paper
Submitted
17 Jan 2015
Accepted
13 Apr 2015
First published
17 Apr 2015

RSC Adv., 2015,5, 38223-38234

A predictive mass transport model for gas separation using glassy polymer membranes

S. N. Shoghl, A. Raisi and A. Aroujalian, RSC Adv., 2015, 5, 38223 DOI: 10.1039/C5RA00988J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements