Issue 31, 2015

Highly selective zirconia-based propene sensor attached with sol–gel derived NiO nanospheres

Abstract

Nanospheres of nickel oxide (NiO) were synthesized by a simple modified sol–gel route using nickel nitrate as a precursor and citric acid as a gelling agent. An yttria-stabilized zirconia (YSZ)-based sensor was fabricated using the sol–gel derived NiO nanospheres as the sensing electrode (SE) and Pt as the reference electrode (RE), and its sensing characteristics were examined in the temperature range of 650–800 °C under various O2 concentrations (5, 10, 15 and 21 vol%). The fabricated NiO-SE was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). It turned out that the sensor attached with the sol–gel derived NiO-SE exhibited a selective and sensitive response to propene (C3H6) at 700 °C in all measured O2 concentrations. The sensor showed the highest sensitivity and selectivity to propene in 21 vol% O2. In addition, the sensor exhibited a stable response to C3H6 for about two months. The sensing mechanism was confirmed to be mixed-potential-type. It is believed that the nanofeatures associated with the sol–gel derived NiO seemed to be responsible for the high sensitivity and selectivity to C3H6.

Graphical abstract: Highly selective zirconia-based propene sensor attached with sol–gel derived NiO nanospheres

Article information

Article type
Paper
Submitted
24 Dec 2014
Accepted
25 Feb 2015
First published
25 Feb 2015

RSC Adv., 2015,5, 24126-24131

Author version available

Highly selective zirconia-based propene sensor attached with sol–gel derived NiO nanospheres

K. Mahendraprabhu and P. Elumalai, RSC Adv., 2015, 5, 24126 DOI: 10.1039/C4RA16992A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements