Issue 21, 2015

MAX phase ternary carbide derived 2-D ceramic nanostructures [CDCN] as chemically interactive functional fillers for damage tolerant epoxy polymer nanocomposites

Abstract

A 2-dimensional ceramic nanostructure was successfully processed out of nanolamellar 312 MAX phase ternary carbide, titanium silicon carbide, Ti3SiC2 (TSC), via a simple shear-induced delamination technique. It has been explored as a functional nanofiller for obtaining chemically homogeneous, low-friction, self-lubricating epoxy nanocomposites. The structural characterization of the MAX phase Carbide Derived Ceramic Nanostructure (CDCN) was carried out using Dynamic Light Scattering (DLS), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) analysis. Subsequently, CDCN was mixed with Araldite CY 225 (DGEBA) at different percentages and thermally cured using Aradur HY 925 hardener at 130 °C to make epoxy–Ti3SiC2 nanocomposites. The effect of CDCN-nanofiller was studied on epoxy rheology, glass transition temperature (Tg), thermal stability, flexural and compressive strengths, microhardness, dry sliding wear and friction properties. It was found that, unlike other ceramic fillers, CDCN chemically interacts with epoxy and readily dispersed in a polymer matrix without any deleterious structural defects. It resulted in the formation of physico-chemically homogeneous microstructures. Epoxy composites prepared with CDCN filler attained 50% more mechanical strength and hardness. Wear analysis trends indicate Ti3SiC2 nano reinforcement possibly formed a lubricating tribo-chemical film that decreases the wear rate and coefficient of friction. This work is significant in such a way that a novel nanofiller has been identified from MAX phase carbide family which offers a self-lubricating interface and produces mechanically reliable, damage tolerant epoxy composite for state-of-the-art engineering applications.

Graphical abstract: MAX phase ternary carbide derived 2-D ceramic nanostructures [CDCN] as chemically interactive functional fillers for damage tolerant epoxy polymer nanocomposites

Supplementary files

Article information

Article type
Paper
Submitted
16 Dec 2014
Accepted
28 Jan 2015
First published
28 Jan 2015

RSC Adv., 2015,5, 16521-16531

MAX phase ternary carbide derived 2-D ceramic nanostructures [CDCN] as chemically interactive functional fillers for damage tolerant epoxy polymer nanocomposites

S. S. Vaisakh, K. V. Mahesh, S. Balanand, R. Metz, M. Hassanzadeh and S. Ananthakumar, RSC Adv., 2015, 5, 16521 DOI: 10.1039/C4RA16518G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements