Direct ligninfuel cell for power generation

Abstract

Lignin, the second most abundant component after cellulose in biomass, has been examined in this study as a fuel for direct conversion into electricity using direct carbon fuel cells (DCFC). Two different types of industrial lignins were investigated: Lignosulfonate (LS) and Kraft lignin (KL), in their commercial forms, after their blending with commercial active carbon (AC) or after alteration of their structures by a pH adjustment to pH 10. It was found that the open circuit voltage (OCV) of the DCFC could reach around 0.7 V in most of the trials. Addition of active carbon increased the maximum current density from 43–57 to 83–101 mA cm⁻². The pH adjustment not only increased the maximum current density but also reduced the differences between the two types of lignins, resulting in an OCV of 0.68–0.69 V and a maximum current density of 74–79 mA cm⁻² from both lignins. Typical power density was 12 (for KL + AC) and 24 mW cm⁻² (for LS + AC). It is concluded that a direct lignin fuel cell is feasible and the lignin hydrophilicity is critical for the cell performance.