Issue 8, 2013

Vertical and in-situ growth of hexaaluminate embedded in alumina intermediate layer with high stability

Abstract

Hexaaluminate (HA) has been in-situ prepared by sharing the aluminum ions from Al2O3 intermediate layer (IML) supported on the FeCrAl alloy foil. The results show that the HA is vertically embedded in Al2O3 IML, and compared with Al2O3 IML, the obtained HA-Al2O3 composite IML shows better adhesion stability.

Graphical abstract: Vertical and in-situ growth of hexaaluminate embedded in alumina intermediate layer with high stability

Supplementary files

Article information

Article type
Communication
Submitted
02 Aug 2012
Accepted
20 Dec 2012
First published
20 Dec 2012

RSC Adv., 2013,3, 2534-2537

Vertical and in-situ growth of hexaaluminate embedded in alumina intermediate layer with high stability

D. Chen, L. Zhang and Y. Liu, RSC Adv., 2013, 3, 2534 DOI: 10.1039/C2RA21677A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements