Issue 1, 2010

Photoelectrocatalytic degradation of methyl orange over mesoporous film electrodes

Abstract

Mesoporous TiO2 films and ion-doped photocatalytic films, displaying a worm-like pattern, have been synthesized by dip-coating of ITO glass into an organic–inorganic sol followed by aging and calcination of the coating at different temperature. The prepared films were investigated by X-ray diffraction (XRD), UV-Vis reflectance spectra, scanning electron microscope (SEM), transmission electron microscopy (TEM) and photoelectrochemical measurement, and were confirmed to be of mesoporous characteristic. Degradation of methyl orange (MO) has been performed using the new film electrodes under UV light and artificial solar light illumination. The influence of variables, such as applied bias, pH, supporting electrolyte, MO concentration and the load of the films, on the degradation of the dye was investigated. More than 97% degradation of MO was achieved under the feasible experimental conditions in 2 h photoelectrocatalytic reaction with UV light illumination and mesoporous film TiO2/ITO as electrode. The activity of the mesoporous film V-TiO2 was the highest of the newly synthesized films V-TiO2, Ce-TiO2, F-TiO2 and pure TiO2 under artificial solar light. The degradation ratio of MO was about 43% over 2 h reaction using V-TiO2/ITO as the electrode. The activity of the mesoporous film under artificial solar light needs to be increased further.

Graphical abstract: Photoelectrocatalytic degradation of methyl orange over mesoporous film electrodes

Article information

Article type
Paper
Submitted
20 Aug 2009
Accepted
24 Nov 2009
First published
11 Dec 2009

Photochem. Photobiol. Sci., 2010,9, 39-46

Photoelectrocatalytic degradation of methyl orange over mesoporous film electrodes

J. Li, J. Wang, L. Huang and G. Lu, Photochem. Photobiol. Sci., 2010, 9, 39 DOI: 10.1039/B9PP00084D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements