Issue 48, 2018

Highly dispersed layered double oxide hollow spheres with sufficient active sites for adsorption of methyl blue

Abstract

The adsorption of dyes in contaminated water is an effective approach to solving the environmental crisis. Layered double hydroxide (LDH) and its calcinated product layered double oxide (LDO) show great potential as adsorbents. However, the conventional preparation of LDH or LDO typically suffers from aggregation and blocked active sites, hampering the adsorption efficiency of the adsorbent. Herein, three-dimensional, hollow MgFe-LDO spheres were constructed through the sacrifice of a carbon template. The hollow structure and the monodisperse state provided MgFe-LDO with sufficient microchannels and abundant active sites for adsorption. Through the memory effect of LDO, the anion methyl blue (MB) can be effectively adsorbed with a high uptake capacity of 398 mg g−1. Isotherm simulations demonstrated the monolayer adsorption of MB and the heterogeneous surfaces of the reconstructed LDHs. Moreover, the adsorbents can be recycled and reutilized at least five times through magnetic separation followed by calcination. Our proposed strategy is expected to provide new possibilities for the construction of adsorbents with well-controlled architecture and abundant active sites to deal with anionic pollutants.

Graphical abstract: Highly dispersed layered double oxide hollow spheres with sufficient active sites for adsorption of methyl blue

Supplementary files

Article information

Article type
Paper
Submitted
08 Oct 2018
Accepted
19 Nov 2018
First published
20 Nov 2018

Nanoscale, 2018,10, 23191-23197

Highly dispersed layered double oxide hollow spheres with sufficient active sites for adsorption of methyl blue

Y. Zong, K. Li, R. Tian, Y. Lin and C. Lu, Nanoscale, 2018, 10, 23191 DOI: 10.1039/C8NR08117D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements