Issue 18, 2018

Effect of dihydronaphthyl-based C60 bisadduct as third component materials on the photovoltaic performance and charge carrier recombination of binary PBDB-T : ITIC polymer solar cells

Abstract

A dihydronaphthyl-based C60 bisadduct (NCBA) acceptor was introduced as a third component to typical poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b0]dithiophene))-alt-(5,5-(10,30-di-2-thienyl-50,70-bis(2-ethylhexyl)benzo[10,20-c:40,50-c0]dithiophene-4,8-dione))] (PBDB-T): 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:20,30-d0]-s-indaceno[1,2-b:5,6-b0]-dithiophene (ITIC) binary polymer solar cells (PSCs). NCBA plays a bridging role between the lowest unoccupied molecular orbital (LUMO) of PBDB-T and ITIC and provides more routes for charge carrier transfer at the interface between PBDB-T and ITIC, whereupon a higher open-circuit voltage (VOC) could be realized upon the addition of NCBA relative to the neat ITIC as an electron acceptor. With the strong visible light absorption in the range from 300 to 520 nm of the NCBA molecule, it had the effect of apparently complementary visible light absorption compared with the binary PBDB-T : ITIC layer. The crystallinity and surface morphology of the PBDB-T : NCBA : ITIC (1 : 0.1 : 0.9) thin films was similar to that of the binary PBDB-T : ITIC layer, which guaranteed suitable efficient exciton dissociation and charge carrier transport. The photocurrent density versus effective voltage (JphVeff) curves, short-circuit current density (JSC), and VOC as a function of incident light intensity as well as the transient photovoltage (TPV) and transient photocurrent (TPC) were measured, and the results illustrated the effects of NCBA as third component materials in terms of efficient exciton dissociation and reduced charge carrier recombination and loss. The PBDB-T : NCBA : ITIC (1 : 0.1 : 0.9)-based PSCs showed an optimized PCE value of 9.56% and better thermal stability after 10 h thermal annealing treatment (the normalized PCE value was 92.5% of the initial PCE value).

Graphical abstract: Effect of dihydronaphthyl-based C60 bisadduct as third component materials on the photovoltaic performance and charge carrier recombination of binary PBDB-T : ITIC polymer solar cells

Supplementary files

Article information

Article type
Paper
Submitted
09 Mar 2018
Accepted
09 Apr 2018
First published
09 Apr 2018

Nanoscale, 2018,10, 8483-8495

Effect of dihydronaphthyl-based C60 bisadduct as third component materials on the photovoltaic performance and charge carrier recombination of binary PBDB-T : ITIC polymer solar cells

S. Niu, Z. Liu and N. Wang, Nanoscale, 2018, 10, 8483 DOI: 10.1039/C8NR01969J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements