Issue 20, 2013

High-performance top-gated monolayer SnS2 field-effect transistors and their integrated logic circuits

Abstract

Two-dimensional (2D) layered semiconductors are very promising for post-silicon ultrathin channels and flexible electronics due to the remarkable dimensional and mechanical properties. Besides molybdenum disulfide (MoS2), the first recognized 2D semiconductor, it is also important to explore the wide spectrum of layered metal chalcogenides (LMCs) and to identify possible compounds with high performance. Here we report the fabrication of high-performance top-gated field-effect transistors (FETs) and related logic gates from monolayer tin disulfide (SnS2), a non-transition metal dichalcogenide. The measured carrier mobility of our monolayer devices reaches 50 cm2 V−1 s−1, much higher than that of the back-gated counterparts (∼1 cm2 V−1 s−1). Based on a direct-coupled FET logic technique, advanced Boolean logic gates and operations are also implemented, with a voltage gain of 3.5 and output swing of >90% for the NOT and NOR gates, respectively. The superior electrical and integration properties make monolayer SnS2 a strong candidate for next-generation atomic electronics.

Graphical abstract: High-performance top-gated monolayer SnS2 field-effect transistors and their integrated logic circuits

Supplementary files

Article information

Article type
Paper
Submitted
18 Apr 2013
Accepted
29 Jul 2013
First published
29 Aug 2013

Nanoscale, 2013,5, 9666-9670

High-performance top-gated monolayer SnS2 field-effect transistors and their integrated logic circuits

H. S. Song, S. L. Li, L. Gao, Y. Xu, K. Ueno, J. Tang, Y. B. Cheng and K. Tsukagoshi, Nanoscale, 2013, 5, 9666 DOI: 10.1039/C3NR01899G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements