Issue 9, 2011

Sensing of oligopeptides using localized surface plasmon resonances combined with Surface-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry

Abstract

Gold nanorods were fixed on an ITO plate and used for the spectroscopic sensing and Surface-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (SALDI-MS) of oligopeptides (angiotensin I). The longitudinal surface plasmon bands of the gold nanorods responded to the 10−10 M angiotensin solution that was cast on the ITO plate. The SALDI-MS measurements had an ultra-high sensitivity to the angiotensin on the ITO plate. A very small surface density (5 × 10−19 mol cm−2) of angiotensin could be detected at m/z = 1297 with a good signal/noise ratio (S/N = 11). The ITO plate, which was modified with gold nanorods, was found to be effective in collecting angiotensin molecules adjacent to the gold nanorods, and the SALDI processes that were induced by the photoabsorption of the gold nanorods efficiently contributed to the desorption and ionization of the angiotensin.

Graphical abstract: Sensing of oligopeptides using localized surface plasmon resonances combined with Surface-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry

Supplementary files

Article information

Article type
Paper
Submitted
21 May 2011
Accepted
06 Jul 2011
First published
09 Aug 2011

Nanoscale, 2011,3, 3793-3798

Sensing of oligopeptides using localized surface plasmon resonances combined with Surface-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry

Y. Nakamura, Y. Tsuru, M. Fujii, Y. Taga, A. Kiya, N. Nakashima and Y. Niidome, Nanoscale, 2011, 3, 3793 DOI: 10.1039/C1NR10519A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements