Jump to main content
Jump to site search

Issue 8, 2019
Previous Article Next Article

Metallic oxide-modified sulfated zirconia: an environment-friendly solid acid catalyst

Author affiliations

Abstract

Metallic oxides were introduced into the synthesis of sulfated zirconia. Catalytic activity was tested by an olefin removal reaction. By combining the analysis from the aspect of catalyst morphology, sulfur state and surface acid property, we concluded that the incorporation of metallic oxides has three important positive effects on the environmental friendly solvent-free preparation: (i) it inhibited the phase transition during calcination and promoted the existence of tetragonal ZrO2, which is recognized as the valid phase; (ii) it increased the amount of S, especially S6+, which is the source of active sites; and (iii) it adjusted the surface acid property, extended the single service lifetime and reduced the deactivation rate.

Graphical abstract: Metallic oxide-modified sulfated zirconia: an environment-friendly solid acid catalyst

Back to tab navigation

Publication details

The article was received on 21 Sep 2018, accepted on 25 Jan 2019 and first published on 28 Jan 2019


Article type: Paper
DOI: 10.1039/C8NJ04636K
New J. Chem., 2019,43, 3625-3632

  •   Request permissions

    Metallic oxide-modified sulfated zirconia: an environment-friendly solid acid catalyst

    N. Liu, X. Wang, L. Shi and X. Meng, New J. Chem., 2019, 43, 3625
    DOI: 10.1039/C8NJ04636K

Search articles by author

Spotlight

Advertisements