Issue 15, 2017

Enhancing upconversion luminescence by annealing processes and the high-temperature sensing of ZnO:Yb/Tm nanoparticles

Abstract

Temperature that affects upconversion luminescence (UCL) is important to biological sensing and magnetic imaging. The temperature-dependent UCL of ZnO:Yb3+/Tm3+ nanoparticles (UCNP) was characterized. A detailed analysis of UCL spectra at different annealing temperatures revealed the effects of annealing temperatures, which were determined by using TGA. The blue and the red UCL emissions under NIR 980 nm excitation were greatly enhanced with the increase of annealing temperature from 300 to 780 °C. The change in high-frequency groups (OH and CO32−) at different annealing temperatures were investigated using IR technique. It was found that the quenching centers were removed due to an increase of annealing temperature. Moreover, for the temperature range of 293 to 338 K, the thermal sensor based on the position shift of the 475 nm wavelength was studied. In addition, relative sensor sensitivity reached a maximum of 2.1% K−1 at 293 K based on the temperature-dependent fluorescence intensity ratio (FIR) of the 700 and 800 nm upconverted emission, which would make the ZnO:Yb3+/Tm3+ nanoparticles a promising candidate for the biological temperature probe.

Graphical abstract: Enhancing upconversion luminescence by annealing processes and the high-temperature sensing of ZnO:Yb/Tm nanoparticles

Article information

Article type
Paper
Submitted
24 Apr 2017
Accepted
04 Jun 2017
First published
14 Jun 2017

New J. Chem., 2017,41, 7116-7122

Enhancing upconversion luminescence by annealing processes and the high-temperature sensing of ZnO:Yb/Tm nanoparticles

Y. Li, Y. Li, R. Wang, Y. Xu and W. Zheng, New J. Chem., 2017, 41, 7116 DOI: 10.1039/C7NJ01358B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements