Jump to main content
Jump to site search

Issue 6, 2018
Previous Article Next Article

Direct ink writing of organic and carbon aerogels

Author affiliations


The use of additive manufacturing to 3D print aerogels has the potential to impact several important technologies such as energy storage, catalysis, and desalination. While there has been a great deal of focus on graphene aerogels, reports of 3D printed conventional carbon aerogels (CAs) are sparse. Activated CAs are particularly compelling because in addition to having a lower cost than a comparable graphene aerogel, they can achieve much higher surface areas (>3000 m2 g−1). Herein we report a 3D printable ink based on traditional resorcinol–formaldehyde sol–gel chemistry that can produce a final activated carbon aerogel with surface areas approaching 2000 m2 g−1 and good electrical conductivities (∼200 S m−1). Direct ink writing (DIW) is used to then fabricate electrodes, which demonstrate excellent electrochemical properties with a high specific capacitance of 215 F g−1 at 1 A g−1 and 83% capacitive retention at higher current densities (10 A g−1). The DIW electrode significantly outperformed its bulk counterpart and provides an example of how one can use 3D printed aerogel electrodes to overcome mass transport limitations and boost energy storage performance.

Graphical abstract: Direct ink writing of organic and carbon aerogels

Back to tab navigation

Supplementary files

Publication details

The article was received on 22 May 2018, accepted on 23 Aug 2018 and first published on 17 Sep 2018

Article type: Communication
DOI: 10.1039/C8MH00603B
Author version

Download author version (PDF)
Mater. Horiz., 2018,5, 1166-1175

  •   Request permissions

    Direct ink writing of organic and carbon aerogels

    S. Chandrasekaran, B. Yao, T. Liu, W. Xiao, Y. Song, F. Qian, C. Zhu, E. B. Duoss, C. M. Spadaccini, Y. Li and M. A. Worsley, Mater. Horiz., 2018, 5, 1166
    DOI: 10.1039/C8MH00603B

Search articles by author