Issue 15, 2014

A microtensiometer capable of measuring water potentials below −10 MPa

Abstract

Tensiometers sense the chemical potential of water (or water potential, Ψw) in an external phase of interest by measuring the pressure in an internal volume of liquid water in equilibrium with that phase. For sub-saturated phases, the internal pressure is below atmospheric and frequently negative; the liquid is under tension. Here, we present the initial characterization of a new tensiometer based on a microelectromechanical pressure sensor and a nanoporous membrane. We explain the mechanism of operation, fabrication, and calibration of this device. We show that these microtensiometers operate stably out to water potentials below −10 MPa, a tenfold extension of the range of current tensiometers. Finally, we present use of the device to perform an accurate measurement of the equation of state of liquid water at pressures down to −14 MPa. We conclude with a discussion of outstanding design considerations, and of the opportunities opened by the extended range of stability and the small form factor in sensing applications, and in fundamental studies of the thermodynamic properties of water.

Graphical abstract: A microtensiometer capable of measuring water potentials below −10 MPa

Supplementary files

Article information

Article type
Paper
Submitted
19 Mar 2014
Accepted
24 May 2014
First published
27 May 2014

Lab Chip, 2014,14, 2806-2817

Author version available

A microtensiometer capable of measuring water potentials below −10 MPa

V. Pagay, M. Santiago, D. A. Sessoms, E. J. Huber, O. Vincent, A. Pharkya, T. N. Corso, A. N. Lakso and A. D. Stroock, Lab Chip, 2014, 14, 2806 DOI: 10.1039/C4LC00342J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements