Issue 18, 2011

Experimental investigation of droplet acceleration and collision in the gas phase in a microchannel

Abstract

We developed a novel microfluidic system, termed a micro-droplet collider, by utilizing the spatial–temporal localized liquid energy to realize chemical processes, which achieved rapid mixing between droplets having a large volume ratio by collision. In this paper, in order to clarify the characteristics of the micro-droplet collider, dynamics of droplet acceleration, stationary motion and collision in the gas phase in a microchannel were experimentally investigated with visualized images using a microscope equipped with a high-speed camera. The maximum velocity of 450 mm s−1 and acceleration of 1500 m s−2 of a 1.6 nL water droplet were achieved at an air pressure of 100 kPa. Measurement results of dynamic contact angles of droplets indicated that wettability of the surface played an important role in the stability of droplet acceleration and collision. We found that the bullet droplet penetrated into the target droplet at collision, which differed from bulk scale. The deformation of the droplet was strongly suppressed by the channel structure, thus stable collision and efficient utilization of the droplet energy were possible. These results are useful for estimating the localized energy, for improving the system in order to realize extreme performance, and for extending the applications of microfluidic devices.

Graphical abstract: Experimental investigation of droplet acceleration and collision in the gas phase in a microchannel

Article information

Article type
Paper
Submitted
10 Mar 2011
Accepted
30 Jun 2011
First published
08 Aug 2011

Lab Chip, 2011,11, 3098-3105

Experimental investigation of droplet acceleration and collision in the gas phase in a microchannel

K. Takahashi, Y. Sugii, K. Mawatari and T. Kitamori, Lab Chip, 2011, 11, 3098 DOI: 10.1039/C1LC20214F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements