Issue 30, 2011

Facile synthesis of LTA molecular sieve membranes on covalently functionalized supports by using diisocyanates as molecular linkers

Abstract

Much effort has been paid towards the preparation of hydrophilic zeolite LTA membranes, and these zeolite LTA membranes have showed excellent performance in hydrophilic separations. However, there are only a few reports on successful shape-selective separations of gas mixtures on zeolite LTA membranes, most separation factors reported so far were lower than the corresponding Knudsen constants. It is often found that zeolite LTA membranes contain inter-crystalline defects to degrade their separation selectivity, which result from the problems that the isolated crystals on the support surface grow together to form a continuous supported LTA layer. In the present work, viaurethane bonds formed by the reaction of isocyanate groups with surface hydroxyls, a facile synthesis method is developed for the seeding-free preparation of supported dense zeolite LTA layers by using 1,4-diisocyanate as a molecular binder to anchor the zeolite nutrients onto the support surface. The α-Al2O3 supported zeolite LTA membrane with a thickness of about 3.5 μm displays molecular sieving performance in gas permeation tests.

Graphical abstract: Facile synthesis of LTA molecular sieve membranes on covalently functionalized supports by using diisocyanates as molecular linkers

Supplementary files

Article information

Article type
Paper
Submitted
12 Apr 2011
Accepted
26 May 2011
First published
29 Jun 2011

J. Mater. Chem., 2011,21, 11424-11429

Facile synthesis of LTA molecular sieve membranes on covalently functionalized supports by using diisocyanates as molecular linkers

A. Huang and J. Caro, J. Mater. Chem., 2011, 21, 11424 DOI: 10.1039/C1JM11549A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements