Issue 36, 2010

Electrochemical ascorbic acid sensor based on DMF-exfoliated graphene

Abstract

This paper describes the electron transfer properties of graphene nano-sheets (GNSs) immobilised on pyrolysed photoresist film (PPF) electrodes. The former are produced by the dispersion and exfoliation of graphite in dimethylformamide, and they are characterised using transmission electron microscopy, scanning electron microscopy and Raman spectroscopy. Cyclic voltammetry and electrochemical impedance spectroscopy are used to quantify the effect of the GNSs on electrochemical surface area and on electron transfer kinetics. Compelling evidence is reported in relation to the importance of edge-plane sites and defects in the promotion of electron transfer at carbon nanostructures. A novel ascorbic acid (vitamin C) sensor is presented based on the PPF/GNS system, which is effective in the range 0.4 to 6.0 mM, with a 0.12 mM detection limit. The selectivity of the sensor is demonstrated using a commercially available vitamin C supplement. This is the first report of the electrochemical properties of graphene nano-sheets produced using liquid-phase exfoliation, and it will serve as an important benchmark in the development of inexpensive graphene-based electrodes with high surface area and electro-catalytic activity.

Graphical abstract: Electrochemical ascorbic acid sensor based on DMF-exfoliated graphene

Supplementary files

Article information

Article type
Paper
Submitted
20 May 2010
Accepted
05 Jul 2010
First published
09 Aug 2010

J. Mater. Chem., 2010,20, 7864-7869

Electrochemical ascorbic acid sensor based on DMF-exfoliated graphene

G. P. Keeley, A. O'Neill, N. McEvoy, N. Peltekis, J. N. Coleman and G. S. Duesberg, J. Mater. Chem., 2010, 20, 7864 DOI: 10.1039/C0JM01527J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements