Issue 37, 2009

Core-shell CuInS2/ZnS quantum dots assembled on short ZnO nanowires with enhanced photo-conversion efficiency

Abstract

A novel quantum-dot-based solar cell assembly consisting of core-shell Zn-doped CuInS2@ZnS (Zn-CIS@ZnS) quantum dots associated with short ZnO (5 μm in length) nanowires was developed and systematically investigated in terms of its nanostructure and optical properties, associated with corresponding solar cell parameters, i.e., VOC, JSC, fill factor (FF). In this investigation, the photo-conversion efficiency of the Zn-CIS-based solar cells without the presence of the ZnS shell can be readily tuned by controlling the Zn/Cu ratio. Furthermore, the efficiency was significantly improved upon the deposition of a thin ZnS shell on these Zn-CIS QDs, where a significant enhancement in short-circuit current density (JSC) by 88% was observed because the ZnS coating is able to effectively eliminate excited electron recombination and enhance the charge transfer efficiency from Zn-CIS QDs to ZnO nanowires. Power-conversion efficiency as high as 0.71% can be attained, which is improved more than 2–3 times compared with that without ZnS coating. Such a unique nanoarchitecture through coupling with both core-shell QDs and short ZnO nanowires suggests a promising design for a quantum dot-based solar cell with considerably improved power-conversion efficiency.

Graphical abstract: Core-shell CuInS2/ZnS quantum dots assembled on short ZnO nanowires with enhanced photo-conversion efficiency

Article information

Article type
Paper
Submitted
17 Apr 2009
Accepted
22 Jun 2009
First published
21 Jul 2009

J. Mater. Chem., 2009,19, 6780-6788

Core-shell CuInS2/ZnS quantum dots assembled on short ZnO nanowires with enhanced photo-conversion efficiency

K. Kuo, D. Liu, S. Chen and C. Lin, J. Mater. Chem., 2009, 19, 6780 DOI: 10.1039/B907765K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements