Issue 17, 2008

Improving performance of polymer photovoltaic devices using an annealing-free approach via construction of ordered aggregates in solution

Abstract

Low crystalline order has been proved to be one of the main hindrances for achieving high performance devices based on thin films composed of crystallizable polymer. In this work, we use a facile method to substantially improve crystallinity of poly(3-hexylthiophene) (P3HT) in its pure or composite film via the construction of ordered precursors in the solution used for thin film deposition. These improvements have been confirmed by bright-field transmission electron micrography, electron diffraction, UV-Vis absorption and wide-angle X-ray diffraction. The electrical conductivity of thus obtained P3HT films is increased by almost two orders of magnitude. Polymer solar cells based on P3HT:PCBM ([6,6]-phenyl C61 butyric acid methyl ester) composite fabricated using this method achieve power conversion efficiencies (PCEs) as high as 3.9%, which is almost four times that of pristine devices and also higher than thermally-annealed devices under the same measurement conditions. This simple method paves the way for the fabrication of high performance devices with an “annealing-free” approach, and enriches the ways to improve crystalline order in thin films comprising crystallizable polymers.

Graphical abstract: Improving performance of polymer photovoltaic devices using an annealing-free approach via construction of ordered aggregates in solution

Article information

Article type
Paper
Submitted
02 Jan 2008
Accepted
26 Feb 2008
First published
11 Mar 2008

J. Mater. Chem., 2008,18, 1984-1990

Improving performance of polymer photovoltaic devices using an annealing-free approach via construction of ordered aggregates in solution

L. Li, G. Lu and X. Yang, J. Mater. Chem., 2008, 18, 1984 DOI: 10.1039/B719945G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements