Jump to main content
Jump to site search

Issue 11, 1999
Previous Article Next Article

A study of impurities in some CdS/CdTe photovoltaic cells prepared by wet-chemical methods using secondary ion mass spectrometry and X-ray photoelectron spectroscopy

Abstract

Quantitative Secondary Ion Mass Spectrometry has been used to determine the elemental profiles and concentrations of isotopes 12C, 16O, 34S and 35Cl within n-CdS/p-CdTe thin film photovoltaic cells. Chemical Bath Deposition (CBD) was used to deposit the CdS window layers. The annealing process induces the formation of a chloride-rich surface layer on CdS as evidenced from X-ray photoelectron spectroscopy measurements. The carbon impurity in heterostructures appears to influence the chloride-promoted recrystallisation of CdTe. High concentrations of 16O, of the order 1020–1021 atoms cm–3 throughout the cells, are consistent with the formation of oxide material in the post-deposition thermal processing. Isotopic profiles for 12C, 34S and 35Cl have similar maxima (≈1019 atoms cm–3) but concentrate at the CdS–CdTe interface. The relatively high tolerance to high concentrations of impurities in our cells suggests that wet chemical methods may have great potential in the fabrication of large area/low cost devices.

Back to tab navigation

Article information


J. Mater. Chem., 1999,9, 2879-2883
Article type
Paper

A study of impurities in some CdS/CdTe photovoltaic cells prepared by wet-chemical methods using secondary ion mass spectrometry and X-ray photoelectron spectroscopy

D. S. Boyle, S. Hearne, D. R. Johnson and P. O’Brien, J. Mater. Chem., 1999, 9, 2879
DOI: 10.1039/A904661E

Search articles by author

Spotlight

Advertisements