Jump to main content
Jump to site search

Issue 2, 1997

Non-hydrolytic sol–gel process: zirconium titanate gels

Abstract

The effectiveness of a non-hydrolytic sol–gel process for the preparation of bicomponent oxides has been studied in the 1:1 system TiO 2 –ZrO 2 . Elemental analysis by energy dispersive X-ray analysis (EDXA) and by inductively coupled plasma (ICP) showed the same Ti:Zr ratio for the amorphous oxide and crystalline ZrTiO 4 which corresponds to that of the initial solution. The direct crystallization of ZrTiO 4 below 700 °C without the intermediate formation of TiO 2 or ZrO 2 indicates that the non-hydrolytic sol–gel process gives rise to the formation of homogeneous zirconium titanate gels.

Article information


J. Mater. Chem., 1997,7, 279-284
Article type
Paper

Non-hydrolytic sol–gel process: zirconium titanate gels

M. Andrianainarivelo, R. J. P. Corriu, D. Leclercq, P. Hubert Mutin and A. Vioux, J. Mater. Chem., 1997, 7, 279 DOI: 10.1039/A605168E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.


Search articles by author

Spotlight

Advertisements