Jump to main content
Jump to site search
Access to RSC content Close the message box

Continue to access RSC content when you are not at your institution. Follow our step-by-step guide.


Issue 11, 2019
Previous Article Next Article

An improved method for recovering and preconcentrating mercury in natural water samples for stable isotope analysis

Author affiliations

Abstract

The composition of stable mercury (Hg) isotopes provides important chemical signatures for tracing the sources and transformation pathways of Hg in the environment. However, such measurements are challenging for natural water samples due to the ultratrace levels of Hg and therefore preconcentration of Hg in water is needed prior to isotope measurements. In this study, we developed a preconcentration method using a modulated apparatus that can be deployed for field measurements. The system includes a 3 L bubbler, a chlorine-impregnated activated carbon (ClC) trap, a zero-air filter connected to the inlet, and a vacuum pump. Hg in aqueous phase samples is first oxidized with BrCl and then reduced with SnCl2. The produced Hg0 is purged from the aqueous phase at a flow rate of 2.5 L min−1 for 1 hour and collected by a trap containing 550 mg of ClC. Hg collected in the ClC trap is then thermally desorbed in argon carrier gas and preconcentrated into a 40% mixed acid solution (4 M HNO3 and 1.3 M HCl). This method was evaluated using solutions spiked with NIST SRM 3133, UM-Almadén and BCR 482 standards at Hg concentrations of 0.5 to 40 ng L−1. The results showed an analytical recovery of 98.8 ± 3.7% (1SD, n = 37) with enrichment factors of up to 1000 times and no significant difference in isotope compositions between the recovered Hg and original standards (t-test, p202Hg = 0.24, p199Hg = 0.58, and p200Hg = 0.87). Duplicate experiments on field aqueous samples showed that the analytical precision was 0.13‰, 0.06‰ and 0.07‰ (n = 16) for δ202Hg, Δ199Hg and Δ200Hg, respectively. The developed method is reliable and efficient for concentrating Hg in natural water samples for determining the Hg isotopic compositions.

Graphical abstract: An improved method for recovering and preconcentrating mercury in natural water samples for stable isotope analysis

Back to tab navigation

Article information


Submitted
17 May 2019
Accepted
17 Sep 2019
First published
18 Sep 2019

J. Anal. At. Spectrom., 2019,34, 2303-2313
Article type
Paper

An improved method for recovering and preconcentrating mercury in natural water samples for stable isotope analysis

K. Li, C. Lin, W. Yuan, G. Sun, X. Fu and X. Feng, J. Anal. At. Spectrom., 2019, 34, 2303
DOI: 10.1039/C9JA00174C

Social activity

Search articles by author

Spotlight

Advertisements