Jump to main content
Jump to site search

Issue 5, 2012
Previous Article Next Article

Surface topography reconstruction by stereo-PIXE

Author affiliations

Abstract

A method of sample surface topography reconstruction is described based on the asymmetry in the X-ray yields acquired by a pair of X-ray detectors positioned at opposite sides of the probing beam. The yield asymmetries in the two simultaneously acquired elemental maps are caused by differences in the X-ray absorption along the X-ray exit route in the sample with a topographically structured surface. The approach presented introduces an asymmetry factor of the X-ray intensity in each of the image pixels to obtain an image asymmetry matrix. The dependence of the asymmetry factor on the local target inclination in the detector plane is calculated for a flat sample surface model. The image asymmetry matrix is then converted into the local inclination angle matrix. As the last step, the surface topography is then reconstructed from the local inclination angle. The method is based on X-ray absorption phenomena and could be applied equivalently in X-ray elemental mapping methods using excitation beams with a well-defined direction in the sample. This includes micro-X-Ray Fluorescence analysis (micro-XRF) and micro-Proton Induced X-ray Emission (micro-PIXE). We demonstrated the method by topographic analysis of engraved metallic samples with stereo-PIXE and compared it with the results of stylus profilometry. The smallest value of the X-ray production depth and the characteristic X-ray attenuation length determines the lateral resolution of the proposed topography reconstruction method.

Graphical abstract: Surface topography reconstruction by stereo-PIXE

Back to tab navigation

Article information


Submitted
15 Dec 2011
Accepted
09 Mar 2012
First published
12 Mar 2012

J. Anal. At. Spectrom., 2012,27, 834-840
Article type
Paper

Surface topography reconstruction by stereo-PIXE

E. G. Hatam, P. Pelicon, M. Lamehi-Rachti, P. Vavpetič, O. Kakuee, N. Grlj, M. Čekada and V. Fathollahi, J. Anal. At. Spectrom., 2012, 27, 834 DOI: 10.1039/C2JA10373G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.


Social activity

Search articles by author

Spotlight

Advertisements