Issue 20, 2020

Supercritical CO2-induced alteration of a polymer–metal matrix and selective extraction of valuable metals from waste printed circuit boards

Abstract

The rapid accumulation of waste electrical and electronic equipment (WEEE) is one of the biggest environmental concerns in modern societies, and this problem will be further accelerated in the future. The use of supercritical CO2 (scCO2) mixed with acids has been proposed as a greener solvent system compared to conventional cyanide and aqua regia solvents. However, the mechanisms of scCO2 for metal extraction from WEEE are still poorly understood. Thus, this study focused on the physical, structural, and chemical interactions between scCO2/acid solvents and complex layered components in waste printed circuit boards (WPCBs), a common type of WEEE. Our study showed that the use of scCO2-based pretreatment allows faster leaching of metals including copper (Cu) in the subsequent hydrometallurgical process using H2SO4 and H2O2, while allowing gold (Au) recovery as hydrometallurgically delaminated solids. This enhancement is due to the selective leaching of Ni and unique inner porous structures created by ScCO2/acid treatment via dissolving the calcium-silicate-bearing fiberglass within WPCBs. Thus, the scCO2-based pretreatment of WPCBs shows a multifaceted green chemistry potential relating to the reduction in solvent usage, and targeted recovery of Au prior to shredding or grinding that would reduce any loss or dilution of Au in the subsequent waste stream.

Graphical abstract: Supercritical CO2-induced alteration of a polymer–metal matrix and selective extraction of valuable metals from waste printed circuit boards

Article information

Article type
Paper
Submitted
23 Jul 2020
Accepted
28 Aug 2020
First published
28 Aug 2020

Green Chem., 2020,22, 7080-7092

Author version available

Supercritical CO2-induced alteration of a polymer–metal matrix and selective extraction of valuable metals from waste printed circuit boards

P. Peng and A. A. Park, Green Chem., 2020, 22, 7080 DOI: 10.1039/D0GC02521F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements