Issue 22, 1996

Synthesis of Pt clusters in zeolite BEA. Effect of reduction rate on cluster size and location

Abstract

The relation between the overall reduction rate of the intermediate PtO species in zeolite BEA, created upon calcination of the tetraammineplatinum(II) exchanged zeolite, and the size and location of the Pt clusters formed has been studied. When the reduction is carried out in excess hydrogen, small clusters (⩽ 15 Å) are formed which are homogeneously distributed over the zeolite matrix. This is explained by the rapid and homogeneous formation of a high number of nucleation sites (Pto atoms) which results in a rapid formation of small Pt aggregates. When the supply of hydrogen is rate determining, a larger average Pt cluster size, a non-uniform cluster size distribution and a larger fraction of clusters on the external surface is obtained. In this case the reduction starts at the external surface and gradually proceeds towards the core of the zeolite crystals. This non-homogeneous formation of nucleation sites results in the enhanced probability of collisions between neutral Pt atoms and aggregates going from the core of the zeolite crystal to the external surface. This, together with steric considerations, explains the increase in the amount of clusters located on the external surface. Pt atoms which collide with full grown clusters, located in the zeolite matrix, have a lower sticking probability because growth beyond the spatial limits requires partial destruction of the zeolite lattice. Migration to the external surface, however, provides the possibility of unrestricted growth.

Article information

Article type
Paper

J. Chem. Soc., Faraday Trans., 1996,92, 4637-4642

Synthesis of Pt clusters in zeolite BEA. Effect of reduction rate on cluster size and location

E. J. Creyghton, A. C. T. van Duin, J. C. Jansen, P. J. Kooyman, H. W. Zandbergen and H. van Bekkum, J. Chem. Soc., Faraday Trans., 1996, 92, 4637 DOI: 10.1039/FT9969204637

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements