Jump to main content
Jump to site search

Issue 10, 2018
Previous Article Next Article

On the application of spectral corrections to particle flux measurements

Author affiliations

Abstract

To study the environmental fate of nanoparticles, reliable measurements of particle fluxes in the atmosphere are of importance. The eddy-covariance (EC) technique can be used to calculate surface fluxes. In this study, the EC technique has been applied to calculate particle fluxes in Helsinki (Finland) and Cabauw (the Netherlands). For reliable estimations of the surface fluxes, particle flux measurements need to be corrected for attenuation at the highest frequencies. This attenuation is caused by the relatively long response time of scalar sensors and measurement set-up. The attenuation can be estimated using a theoretical or an empirical approach. Horst [Horst, Boundary-Layer Meteorology, 1997, 82(2)] developed a simple formula to estimate the attenuation, based on the empirical approach. The empirical approach relies on the assumption of spectral similarity between two scalars. In this paper the effect of the spectral similarity assumption is investigated. It is shown that in order to apply the Horst formula reliably, a decent estimate of the sensor response time is required. Furthermore, it is shown that in order to apply the empirical method, a fast sensor response is required. It is concluded that theory does not predict the position of the peak in the cospectrum well, which means that for measurement set-ups not yet operational, this requirement is not easily evaluated. The assumption of spectral similarity seems reasonable for particle fluxes and heat fluxes, when compared to similarity between fluxes of other scalars. An altered assumption of spectral similarity has been applied, where similarity is assumed only at frequencies higher than the peak frequency in the cospectrum. This assumption leads to a better estimate for the attenuation, when applied to the Helsinki data. It does not lead to an improvement for the Cabauw data set, due to the large response time of the measurement set-up.

Graphical abstract: On the application of spectral corrections to particle flux measurements

  • This article is part of the themed collection: ICEENN
Back to tab navigation

Publication details

The article was received on 11 May 2018, accepted on 17 Jul 2018 and first published on 29 Aug 2018


Article type: Paper
DOI: 10.1039/C8EN00501J
Citation: Environ. Sci.: Nano, 2018,5, 2315-2324
  •   Request permissions

    On the application of spectral corrections to particle flux measurements

    A. Oosterwijk, B. Henzing and L. Järvi, Environ. Sci.: Nano, 2018, 5, 2315
    DOI: 10.1039/C8EN00501J

Search articles by author

Spotlight

Advertisements