Issue 20, 2020

Facile synthesis of Mn-doped NiCo2O4 nanoparticles with enhanced electrochemical performance for a battery-type supercapacitor electrode

Abstract

We report the synthesis of manganese-doped nickel cobalt oxide (Mn-doped NiCo2O4) nanoparticles (NPs) by an efficient hydrothermal and subsequent calcination route. The material exhibits a homogeneous distribution of the Mn dopant and a battery-type behavior when tested as a supercapacitor electrode material. Mn-doped NiCo2O4 NPs show an excellent specific capacity of 417 C g−1 at a scan rate of 10 mV s−1 and 204.3 C g−1 at a current density of 1 A g−1 in a standard three-electrode configuration, ca. 152–466% higher than that of pristine NiCo2O4 or MnCo2O4. In addition, Mn-doped NiCo2O4 NPs showed an excellent capacitance retention of 99% after 1000 charge–discharge cycles at a current density of 2 A g−1. The symmetric solid-state supercapacitor device assembled using this material delivered an energy density of 0.87 μW h cm−2 at a power density of 25 μW h cm−2 and 0.39 μW h cm−2 at a high power density of 500 μW h cm−2. The cost-effective synthesis and high electrochemical performance suggest that Mn-doped NiCo2O4 is a promising material for supercapacitors.

Graphical abstract: Facile synthesis of Mn-doped NiCo2O4 nanoparticles with enhanced electrochemical performance for a battery-type supercapacitor electrode

Supplementary files

Article information

Article type
Paper
Submitted
28 Mar 2020
Accepted
28 Apr 2020
First published
29 Apr 2020

Dalton Trans., 2020,49, 6718-6729

Facile synthesis of Mn-doped NiCo2O4 nanoparticles with enhanced electrochemical performance for a battery-type supercapacitor electrode

T. V. Nguyen, L. T. Son, V. V. Thuy, V. D. Thao, M. Hatsukano, K. Higashimine, S. Maenosono, S. Chun and T. V. Thu, Dalton Trans., 2020, 49, 6718 DOI: 10.1039/D0DT01177K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements