Issue 7, 2018

Charge recombination control for high efficiency CdS/CdSe quantum dot co-sensitized solar cells with multi-ZnS layers

Abstract

ZnS as an inorganic passivation agent has been proven to be effective in suppressing charge recombination and enhancing power conversion efficiency (PCE) in quantum dot-sensitized solar cells (QDSCs). In the present study, we constructed a novel TiO2/ZnS/CdS/ZnCdS/CdSe/ZnS photoelectrode via successive ionic layer adsorption and reaction (SILAR) and chemical bath deposition (CBD). The complementary effects of multi-ZnS layers on the optical and electrochemical performance of the QDSCs were systematically investigated. The multi-ZnS can not only facilitate the growth and distribution of QDs, but also suppress the different interface charge recombination effectively. We suggest that the formation of the ZnCdS intermediate layers via ion-exchange route during CBD process contributes to the higher photoelectrochemical cell performance of the QDSCs with the middle ZnS layer. When the three-layer ZnS was employed in CdS/CdSe co-sensitized system, the PCE reached 6.05%, which is much higher than that observed for solar cells with the conventional single ZnS treatments and the two layers inserted at the interface between CdS QDs and CdSe QDs and electrolyte (4.80% and 5.42%, respectively).

Graphical abstract: Charge recombination control for high efficiency CdS/CdSe quantum dot co-sensitized solar cells with multi-ZnS layers

Supplementary files

Article information

Article type
Paper
Submitted
19 Nov 2017
Accepted
08 Jan 2018
First published
08 Jan 2018

Dalton Trans., 2018,47, 2214-2221

Charge recombination control for high efficiency CdS/CdSe quantum dot co-sensitized solar cells with multi-ZnS layers

Q. Wu, J. Hou, H. Zhao, Z. Liu, X. Yue, S. Peng and H. Cao, Dalton Trans., 2018, 47, 2214 DOI: 10.1039/C7DT04356B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements