Issue 20, 2014

Efficient capture of strontium from aqueous solutions using graphene oxide–hydroxyapatite nanocomposites

Abstract

Three-dimensional hierarchical flower-like graphene oxide–hydroxyapatite (GO–HAp) nanocomposites were synthesized by a simple biomimetic method in a modified simulated body fluid (mSBF). The obtained GO–HAp nanocomposites were characterized by field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and N2 adsorption–desorption analysis. The formation mechanism was proposed and the prepared GO–HAp was applied as an adsorbent to remove strontium from large volumes of aqueous solutions. A maximum adsorption capacity of 702.18 mg g−1 was achieved on GO–HAp, almost two fold higher than that of bare HAp and nine fold higher than that of GO. The effects of pH, adsorbent content, contact time and Sr2+ initial concentrations on Sr2+ removal from solution by GO–HAp were systematically investigated, and the results indicated that the removal of Sr2+ by GO–HAp was weakly dependent on solution pH. The results herein reveal that the GO–HAp nanocomposites had exceptional potential as a suitable material for preconcentration and solidification of radiostrontium from large volumes of aqueous solutions in nuclear waste management and radiostrontium pollution cleanup.

Graphical abstract: Efficient capture of strontium from aqueous solutions using graphene oxide–hydroxyapatite nanocomposites

Supplementary files

Article information

Article type
Paper
Submitted
21 Dec 2013
Accepted
27 Jan 2014
First published
27 Jan 2014

Dalton Trans., 2014,43, 7464-7472

Efficient capture of strontium from aqueous solutions using graphene oxide–hydroxyapatite nanocomposites

T. Wen, X. Wu, M. Liu, Z. Xing, X. Wang and A. Xu, Dalton Trans., 2014, 43, 7464 DOI: 10.1039/C3DT53591F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements