Issue 8, 2020

Carbon nanotube-supported Cu-based catalysts for oxidative carbonylation of methanol to methyl carbonate: effect of nanotube pore size

Abstract

Carbon nanotubes (CNTs) with three different inner diameters (2–5 nm, 5–10 nm and 20–50 nm) were employed as supports to prepare Cu-based catalysts for oxidative carbonylation of methanol to dimethyl carbonate (DMC). The catalysts were extensively characterized by N2-physisorption, TEM, H2-TPR, XRD, TPD-MS, in situ-XRD, XPS, N2O chemisorption and AAS. The results indicated that CNTs with a small inner diameter were favorable for the entry of Cu species into the cavity and the formation of highly dispersed Cu particles. The highly dispersed Cu species presented strong interaction with CNTs, which facilitated the auto-reduction of CuO to active Cu2O and Cu during the calcination. The dispersion and percentage of active Cu species for Cu/CNT (2–5) were maximum among all the catalysts, and hence it presented the optimal initial activity for oxidative carbonylation of methanol. The conversion of methanol and the space time yield of DMC were 4.2% and 2.2 g g−1 h−1), respectively. Moreover, the stability of Cu species was closely related to their particle size, the inner diameter of CNTs and the interaction between Cu species and CNTs. The Cu species of Cu/CNT (20–50) seriously aggregated after the reaction due to the weak interaction between Cu species and CNT (20–50) as well as the insufficient confinement effect of CNT (20–50). CNT (2–5) presented the strongest interaction with Cu species; however, it cannot effectively retard the migration and agglomeration of Cu species resulting from the extremely high surface energy of these small particles (1–3 nm). Unlike Cu/CNT (2–5) and Cu/CNT (20–50), the particles of Cu species for Cu/CNT (5–10) were more stable owing to the modest particle size and the moderate interaction between Cu species and CNT (5–10). Furthermore, the enhanced interaction between Cu species and CNTs can effectively suppress the oxidation of Cu species during the reaction. The deactivation of Cu/CNT (20–50) was due to the agglomeration and oxidation of Cu species, and the deactivation of Cu/CNT (2–5) was due to the agglomeration of Cu species, whereas that of Cu/CNT (5–10) was due to the oxidation of Cu species. Cu/CNT (5–10) exhibited the optimal stability.

Graphical abstract: Carbon nanotube-supported Cu-based catalysts for oxidative carbonylation of methanol to methyl carbonate: effect of nanotube pore size

Article information

Article type
Paper
Submitted
27 Nov 2019
Accepted
23 Mar 2020
First published
24 Mar 2020

Catal. Sci. Technol., 2020,10, 2615-2626

Carbon nanotube-supported Cu-based catalysts for oxidative carbonylation of methanol to methyl carbonate: effect of nanotube pore size

D. Zhao, G. Zhang, L. Yan, L. Kong, H. Zheng, J. Mi and Z. Li, Catal. Sci. Technol., 2020, 10, 2615 DOI: 10.1039/C9CY02407G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements