Issue 3, 2015

A high-performance Fe and nitrogen doped catalyst derived from diazoniapentaphene salt and phenolic resin mixture for oxygen reduction reaction

Abstract

A high-performance ORR catalyst has been synthesised by pyrolysis of quaternary nitrogen-containing 4a,8a-diazoniapentaphene dibromide (DAP), phenolic resin and FeBr2 mixture. The catalyst (Fe/DAP) was characterized by XPS, SEM and TEM analysis. The ORR activity was studied using rotating ring–disk electrode voltammetry (RRDE) and the onset potential of ORR was found to be 0.95 V vs. RHE in 0.5 M H2SO4 solution, which is very close to that of the state-of-the-art Pt/C catalyst. The stability of the catalyst was studied using LD and SSD tests and found to be highly stable even after 11 110 potential-steps in the LD test. The kinetic and mechanistic analyses of the ORR on the catalyst indicate that the ORR, as a whole, follows a 4-electron (parallel) pathway. The relative changes in the nitrogen content after the durability test was estimated using N 1s XPS spectra which may be associated with the activity loss after the durability test. The loss of ORR activity was observed after the acid washing of the catalyst which suggests the role of Fe in the direct 4-electron reduction of O2.

Graphical abstract: A high-performance Fe and nitrogen doped catalyst derived from diazoniapentaphene salt and phenolic resin mixture for oxygen reduction reaction

Article information

Article type
Paper
Submitted
01 Nov 2014
Accepted
17 Dec 2014
First published
17 Dec 2014

Catal. Sci. Technol., 2015,5, 1764-1774

A high-performance Fe and nitrogen doped catalyst derived from diazoniapentaphene salt and phenolic resin mixture for oxygen reduction reaction

A. Muthukrishnan, Y. Nabae, C. W. Chang, T. Okajima and T. Ohsaka, Catal. Sci. Technol., 2015, 5, 1764 DOI: 10.1039/C4CY01429D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements