Issue 23, 2016

Functionalized calcium silicate nanofibers with hierarchical structure derived from oyster shells and their application in heavy metal ions removal

Abstract

Inorganic hierarchical nanostructures have remarkable potential applications in environmental metal remediation; however, their applications usually suffer from low capacity, high cost, and difficulties in the recycling of adsorbents. We previously reported a facile strategy to synthesize acid-insoluble calcium silicate hydrates (CSH) from oyster shells, a representative kind of biowaste. However, little is known of the structure, size, and morphology of the as-prepared CSH, which hampers the improvement of their adsorption capacities. In this work, systematic investigation of the structures of as-generated CSH demonstrate that they have a hierarchically porous structure composed of thin nano-sheets, where each nano-sheet is assembled by nano-fibers with width of around ten nanometers. The hierarchical nanostructures with pore size of ∼12 nm provide a significant amount of active sites to graft polyethyleneimine (PEI), which enables the efficient extraction of both Cu(II) cations and Cr(VI) anions from the aqueous solution. Batch experiments further indicate that the PEI-modified PCSH exhibit a maximum adsorption capacity of 203 and 256 mg g−1 for Cu(II) and Cr(VI), respectively, much higher than that of CSH, OS and many other adsorbents in literature. The adsorption of Cu(II) and Cr(VI) proved to be spontaneous and exothermic. Combining the pH-dependent experiments with X-ray photoelectron spectroscopy analysis, the underlying mechanism is discussed. PCSH derived from OS biowaste maintains an efficient extraction ability toward Cu(II) and Cr(VI) after five adsorption–desorption cycles. It is also applicable for treating various kinds of heavy metal ions and organic pollutants, showing potentially wide applications in water treatment.

Graphical abstract: Functionalized calcium silicate nanofibers with hierarchical structure derived from oyster shells and their application in heavy metal ions removal

Supplementary files

Article information

Article type
Paper
Submitted
22 Feb 2016
Accepted
05 May 2016
First published
09 May 2016

Phys. Chem. Chem. Phys., 2016,18, 15564-15573

Functionalized calcium silicate nanofibers with hierarchical structure derived from oyster shells and their application in heavy metal ions removal

W. You, M. Hong, H. Zhang, Q. Wu, Z. Zhuang and Y. Yu, Phys. Chem. Chem. Phys., 2016, 18, 15564 DOI: 10.1039/C6CP01199C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements