Issue 14, 2004

Interactions of gaseous nitric acid with surfaces of environmental interest

Abstract

Gaseous nitric acid removal by surfaces in experimental systems and in the atmospheric boundary layer is rapid. However, neither the form of HNO3 on surfaces nor its impact on the properties of the thin surface film are known. We report here studies of surfaces that have been exposed at room temperature (295 ± 2 K) to gaseous mixtures of water vapor with HNO3 at concentrations from 46 ppb to 4 × 103 ppm. The surfaces were probed using a combination of Fourier transform infrared spectrometry (FTIR), non-contact atomic force microscopy (AFM), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and X-ray photoelectron spectroscopy (XPS). Exposure of borosilicate glass, quartz, and thin Teflon films to mixtures of gaseous HNO3 and water vapor leads to the subsequent uptake of much larger amounts of water than occurs on the corresponding unexposed surfaces. Infrared spectra show evidence for the formation of nitric acid–water complexes on the surface that leads to this enhanced water uptake. On borosilicate glass, exposure to the nitric acid–water vapor mixture results in surface segregation of the trace metal oxides and their nitrates formed from reaction with HNO3. The majority of these oxides can be removed by rinsing with water; however, smaller, segregated regions of ZnO remain on the surface. The implications for heterogeneous reactions in thin films on surfaces in laboratory systems and in the atmosphere are discussed.

Article information

Article type
Paper
Submitted
18 Mar 2004
Accepted
30 Apr 2004
First published
19 May 2004

Phys. Chem. Chem. Phys., 2004,6, 3879-3888

Interactions of gaseous nitric acid with surfaces of environmental interest

Y. Dubowski, A. L. Sumner, E. J. Menke, D. J. Gaspar, J. T. Newberg, R. C. Hoffman, R. M. Penner, J. C. Hemminger and B. J. Finlayson-Pitts, Phys. Chem. Chem. Phys., 2004, 6, 3879 DOI: 10.1039/B404127E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements