Issue 32, 2018

Degradation of RhB by a sono-Fenton-like process with an iron-foam in the presence of oxalic acid

Abstract

The decolorization of rhodamine B (RhB) using ultrasound (US) combined with a Fenton-like process has been investigated. The effects of operating parameters such as initial dye concentration, pH, and addition of oxalic acid were studied. As expected, the rate and extent of decolorization of RhB increased with rising oxalic acid concentration, but slightly decreased with increasing dye concentration, and exhibited excellent removal efficiency in the wide pH range of 3–9. It was found that, while the degradation rate due to ultrasound alone was slow, the sonication significantly accelerated the Fenton-like reaction. It has been observed that the maximum degradation of 92.16% was obtained under optimum operating conditions of [RhB] = 5 mg L−1; [Oxalic] = 25 mM; pH = 3. The decolorization pattern obeyed first order kinetics and was used to calculate apparent rate constants for dye decolorization. Furthermore, studies in the presence of radical scavengers such as tert-butyl alcohol (TBA), isopropanol (IPA), catalase and L-His on the degradation of RhB were performed, and the results indicated that Image ID:c8ay00839f-t1.gif and H2O2 played an important role in this system. Overall it can be said that the combined process resulted in higher extent of degradation as compared to the individual processes based on Fenton type or US irradiation.

Graphical abstract: Degradation of RhB by a sono-Fenton-like process with an iron-foam in the presence of oxalic acid

Article information

Article type
Paper
Submitted
14 Apr 2018
Accepted
13 Jul 2018
First published
16 Jul 2018

Anal. Methods, 2018,10, 3976-3983

Degradation of RhB by a sono-Fenton-like process with an iron-foam in the presence of oxalic acid

G. Li, S. Qiu, F. Ma, Y. Ji and X. Jiang, Anal. Methods, 2018, 10, 3976 DOI: 10.1039/C8AY00839F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements