Issue 15, 2014

AMS measurements of trace levels of boron in graphite

Abstract

The accelerator mass spectrometry analyzing method has been applied to measure low boron concentrations in graphite for nuclear reactors. The detection limits were found to be between 5 × 10−6 (upper limit) and 3 × 10−12 (lower limit) for the B/C mass ratio.

Graphical abstract: AMS measurements of trace levels of boron in graphite

Article information

Article type
Paper
Submitted
01 Apr 2014
Accepted
14 May 2014
First published
15 May 2014

Anal. Methods, 2014,6, 5808-5811

AMS measurements of trace levels of boron in graphite

C. Stan-Sion, M. Enachescu, A. R. Petre and C. I. Calinescu, Anal. Methods, 2014, 6, 5808 DOI: 10.1039/C4AY00793J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements