Issue 12, 2011

Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes

Abstract

Microfluidics is an evolving scientific field with immense commercial potential: analytical applications, such as biochemical assay development, biochemical analysis and biosensors as well as chemical synthesis applications essentially require microfluidics for sample handling, treatment or readout. A number of techniques are available to create microfluidic structures today. On industrial scale replication techniques such as injection molding are the gold standard whereas academic research mostly focuses on replication by casting of soft elastomers such as polydimethylsiloxane (PDMS). Both of these techniques require the creation of a replication master thus creating the microfluidic structure only in the second process step—they can therefore be termed two-(or multi-)step manufacturing techniques. However, very often the number of pieces to be created of one specific microfluidic design is low, sometimes even as low as one. This raises the question if two-step manufacturing is an appropriate choice, particularly if short concept-to-chip times are required. In this case one-step manufacturing techniques that allow the direct creation of microfluidic structures from digital three-dimensional models are preferable. For these processes the number of parts per design is low (sometimes as low as one), but quick adaptation is possible by simply changing digital data. Suitable techniques include, among others, maskless or mask based stereolithography, fused deposition molding and 3D printing. This work intends to discuss the potential and application examples of such processes with a detailed view on applicable materials. It will also point out the advantages and the disadvantages of the respective technique. Furthermore this paper also includes a discussion about non-conventional manufacturing equipment and community projects that can be used in the production of microfluidic devices.

Graphical abstract: Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes

Article information

Article type
Critical Review
Submitted
29 Apr 2011
Accepted
05 Sep 2011
First published
10 Oct 2011

Anal. Methods, 2011,3, 2681-2716

Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes

A. Waldbaur, H. Rapp, K. Länge and B. E. Rapp, Anal. Methods, 2011, 3, 2681 DOI: 10.1039/C1AY05253E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements