Issue 9, 2018

Metal–organic frameworks as affinity agents to enhance the microdialysis sampling efficiency of fatty acids

Abstract

Microdialysis (MD) has been extensively used for in vivo sampling of hydrophilic analytes such as neurotransmitters and drug metabolites. In contrast, there have been few reports on sampling of lipophilic analytes by MD. Lipophilic analytes are easily adsorbed on the surfaces of the dialysis membrane and the inner wall of tubing, which leads to a very low relative recovery (RR). In this work, a strategy to develop an enhanced MD sampling of fatty acids (FAs) by using metal–organic frameworks (MOFs) as affinity agents in the perfusion fluid was investigated. Two MOFs, MIL-101 and ZIF-8, were synthesized and tested for the first time. A 2 times higher RR, about 70% RR, was obtained. The FT-IR experiment showed that the unsaturated metal sites in MOFs could coordinate with FAs, therefore the FAs were encapsulated into MOFs, avoiding FAs to be absorbed on the surfaces of the dialysis membrane and the inner wall of tubing. Moreover, incorporation of FAs into MOFs led to a decrease of free concentration of FAs inside the MD membrane and an increase of concentration gradient, allowing more FAs to diffuse across the membrane. Consequentially, an enhanced RR was obtained. The approach was successfully used to monitor the time profile of targeted FAs in cell culture media after lipopolysaccharide (LPS)-induced inflammation.

Graphical abstract: Metal–organic frameworks as affinity agents to enhance the microdialysis sampling efficiency of fatty acids

Supplementary files

Article information

Article type
Paper
Submitted
06 Feb 2018
Accepted
21 Mar 2018
First published
26 Mar 2018

Analyst, 2018,143, 2157-2164

Metal–organic frameworks as affinity agents to enhance the microdialysis sampling efficiency of fatty acids

H. Yang, T. Li, L. Liu, N. Li, M. Guan, Y. Zhang, Z. Wang and Z. Zhao, Analyst, 2018, 143, 2157 DOI: 10.1039/C8AN00238J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements