Issue 10, 2008

Novel superparamagnetic core-shell molecular imprinting microspheres towards high selective sensing

Abstract

Novel superparamagnetic core-shell imprinting microspheres (MCSIMs) were synthesized using magnetite microspheres with 350 nm diameter and 70 nm thickness silica gel to form core-shell Fe3O4/SiO2 composite for template phenylephrine (Phen) recognition and high efficiency separation. Compared to the previous imprinting recognition, the main advantage of this strategy lies in two aspects: one is the high stability and monodispersity of the MCSIMs structure, the other is the use of superparamagnetic Fe3O4/SiO2 microspheres as an immobilization matrix and separation tool, thus greatly simplifying time-consuming washing steps. The affinity and selectivity of the MCSIMs were monitored by QCM and electrochemistry measurements. Imprinting microspheres have a remarkable affinity to Phen over that of structurally related molecules, including DA, EP, Phe and Tyr. The relative binding selectivity for different analytes estimated from amperometric signals was Phen : DA : EP = 40 : 5 : 1. The MCSIMs sensor showed a high sensitivity (400 μA mM−1), short response time (reaching 98% within 10 s), and broad linear response range from 1 μM to 0.1 mM and low detection limit (0.1 μM). Additionally, the results of control experiments showed that only negligible signal was obtained for non-imprinting microspheres. This could be reasonably attributed to the unique surface pores, charges and especially the nature of the functional groups inside MCSIMs cavities.

Graphical abstract: Novel superparamagnetic core-shell molecular imprinting microspheres towards high selective sensing

Article information

Article type
Paper
Submitted
06 Feb 2008
Accepted
21 May 2008
First published
10 Jul 2008

Analyst, 2008,133, 1367-1372

Novel superparamagnetic core-shell molecular imprinting microspheres towards high selective sensing

G. Jin, W. Li, S. Yu, Y. Peng and J. Kong, Analyst, 2008, 133, 1367 DOI: 10.1039/B802120A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements